Please check tank size before buying.
The tank dividers are compatible with the following tanks.
Top Fin Tank size : 20.1"L x 10.1"W x 12.8"H
Aquaculture Kit tank (NOT the basic tank) 20.1"L x 10.1"W x 12.8"H Click here for compatibility with the basic tank.
Tetra Basic Tank (NOT the tetra kit): 20.1"L x 10.1"W x 12.4"H
Marineland Tank Size: 20"L x 10"Wx 12"H
Divider size: Width minimum 9 7/16 inches to maximum 9 3/4 inches
Height minimum 11.25 inches to maximum 11.5 inches
Premium Package Contents
1 x 10 gallon divider
2 x Sponge Filter
1 x 25ft Airline Tubing
1 x Two way adjustable air flow valve
2 x Return Check Valve
Premium Package Plus Contents
1 x 10 gallon divider
2 x Sponge Filter
1 x 25ft Airline Tubing
1 x Two way adjustable air flow valve
2 x Return Check Valve
1 Air Pump
10 Gallon Tank Divider
Which Divider is Best For You?
With holes: A divider with holes helps with water flow. We do recommend sponge filters in each section. The bettas can also periodically see each other which will promote enrichment and occasional flaring.
Without Holes: A divider with no holes provides a very peaceful environment. The bettas will still occasionally see each other but not as often as with the divider with holes. This divider does require filtration in each section. We recommend sponge filters as the flow can be adjusted to the bettas requirements.
Things to note before buying.
These dividers are not flimsy like mesh dividers and you will likely require filtration in each section to help with water flow.
If the divider is cut or modified in any way you do so at your own risk.
Do not force the divider into a tank as we will not be held responsible for any damage to the aquarium.
To see how to install the divider click here Videos
Made in the USA.
Sponge Filter
This sponge filter is ideal for 10 gallon divided Betta fish tanks and also 5 gallon and under tanks. They provide low water flow which is important in a Betta fish tank. They are also good for fry tanks and shrimp tanks.
It is easy to clean and maintain, simply rinse and squeeze the sponge in aquarium water. It is a biochemical filter which promotes good water quality.
**The sponge filter requires an air pump and airline tubing to work. These are not included in the premium package only the premium package plus.
Dimensions
Tube length 2 inches
Tube Diameter 0.5 inches
Sponge width 2.25 inches
Sponge height 2 inches
Total height of the filter 5 inches.
Air Line Tubing
25ft of premium 4mm airline tubing
2 Way Air Pump Lever Valve
This valve allows you to run two sponge filters off one air pump.
Return Check Valve.
The return safety valve stops water being able to flow back down the air line tubing and into your air pump.
Aqueon Quietflow 10 Air pump.
The air pump is easy and efficient to use. It is very quiet.
ViaAqua 50W Suitable for up to 10 gallons **(Heaters are sold separately)
Features
The tank dividers are compatible with the following tanks.
Top Fin Tank size : 20.1"L x 10.1"W x 12.8"H
Aquaculture Kit tank (NOT the basic tank) 20.1"L x 10.1"W x 12.8"H Click here for compatibility with the basic tank.
Tetra Basic Tank (NOT the tetra kit): 20.1"L x 10.1"W x 12.4"H
Marineland Tank Size: 20"L x 10"Wx 12"H
Divider size: Width minimum 9 7/16 inches to maximum 9 3/4 inches
Height minimum 11.25 inches to maximum 11.5 inches
Premium Package Contents
1 x 10 gallon divider
2 x Sponge Filter
1 x 25ft Airline Tubing
1 x Two way adjustable air flow valve
2 x Return Check Valve
Premium Package Plus Contents
1 x 10 gallon divider
2 x Sponge Filter
1 x 25ft Airline Tubing
1 x Two way adjustable air flow valve
2 x Return Check Valve
1 Air Pump
10 Gallon Tank Divider
- 10 gallon tank divider is perfect for Betta Fish
- Easy to install and maintain.
- Comes with an instruction sheet and a video link on how to install them.
- Made from a solid material and are very sturdy.
- Works best in a tank with substrate and may not be suitable for bare bottom tanks.
- The divider will not work in a rimless tank unless siliconed in placed
- If you don't have a tight fitting lid you may need to lower the water level.
- The tank divider can be used in reptile tanks if siliconed in place we do recommend a no holes divider for reptiles.
- The no holes divider is also perfect for dividing shrimp and guppy tanks but must be siliconed in place.
Which Divider is Best For You?
With holes: A divider with holes helps with water flow. We do recommend sponge filters in each section. The bettas can also periodically see each other which will promote enrichment and occasional flaring.
Without Holes: A divider with no holes provides a very peaceful environment. The bettas will still occasionally see each other but not as often as with the divider with holes. This divider does require filtration in each section. We recommend sponge filters as the flow can be adjusted to the bettas requirements.
Things to note before buying.
These dividers are not flimsy like mesh dividers and you will likely require filtration in each section to help with water flow.
If the divider is cut or modified in any way you do so at your own risk.
Do not force the divider into a tank as we will not be held responsible for any damage to the aquarium.
To see how to install the divider click here Videos
Made in the USA.
Sponge Filter
This sponge filter is ideal for 10 gallon divided Betta fish tanks and also 5 gallon and under tanks. They provide low water flow which is important in a Betta fish tank. They are also good for fry tanks and shrimp tanks.
It is easy to clean and maintain, simply rinse and squeeze the sponge in aquarium water. It is a biochemical filter which promotes good water quality.
**The sponge filter requires an air pump and airline tubing to work. These are not included in the premium package only the premium package plus.
Dimensions
Tube length 2 inches
Tube Diameter 0.5 inches
Sponge width 2.25 inches
Sponge height 2 inches
Total height of the filter 5 inches.
Air Line Tubing
25ft of premium 4mm airline tubing
2 Way Air Pump Lever Valve
This valve allows you to run two sponge filters off one air pump.
Return Check Valve.
The return safety valve stops water being able to flow back down the air line tubing and into your air pump.
Aqueon Quietflow 10 Air pump.
The air pump is easy and efficient to use. It is very quiet.
ViaAqua 50W Suitable for up to 10 gallons **(Heaters are sold separately)
Features
- High Quality, Break Resistant Quartz Glass Construction
- Fully Submersible
- Simple Installation
- Temperature Adjustment
- Light to indicate On/Off
- Suction Cups for Securing To the Aquarium
- Visible Temperature Setting
- For Use in Fresh and Saltwater
- California Residents : View Proposition 65 Warning