These dividers are imperfects. They will come with scratches, holes out of alignment and/or marks on them. They are still fully functional and the product is not compromised in any way. The pictures above are a representation of the damage. Damage will vary.
Please check tank size before buying.
Only Compatible with Aqueon 10 gallon tank 20.3"L x 10.5"W x 12.6"H
Actual size: Width minimum 9 7/8inches to maximum 10 1/4 inches
Height minimum 11 1/2 inches to maximum 12 inches
Compatible with Aqueon 20 gallon long tanks. these dividers do not fit any other brand of tank.
Actual size: Width minimum 11 5/8 inches to maximum 12 inches
Height minimum 11 1/2 inches to maximum 12 inches
These dividers do NOT fit any other brand of tank other than those listed above.
The dividers are easy to install and maintain. They will come with an instruction sheet and a video link on how to install them. They are made from a solid material and are very sturdy. The divider has been designed with holes throughout. It works best in a tank with substrate and is not suitable for bare bottom tanks. The divider will not work in a rimless tank unless siliconed in place. If you don't have a tight fitting lid you may need to lower the water level.
Which Divider is Best For You?
With holes: A divider with holes helps with water flow. We do recommend sponge filters in each section. The bettas can also periodically see each other which will promote enrichment and occasional flaring.
Without Holes: A divider with no holes provides a very peaceful environment. The bettas will still occasionally see each other but not as often as with the divider with holes. This divider does require filtration in each section. We recommend sponge filters as the flow can be adjusted to the bettas requirements.
A no holes divider is also perfect for dividing shrimp and guppy/endler tanks. Aquarium sealant is required to make a fully enclosed section so shrimp or guppies cannot get to the other side. This is ideal if you're wanting to keep specific colors or strains from cross breeding.
Things to note before buying.
These dividers are not flimsy like mesh dividers and you may find you require filtration in each section to help with water flow.
Do not force the divider into a tank as we will not be held responsible for any damage to the aquarium.
To see how to install the divider click here Videos
Made in the USA.
Only Compatible with Aqueon 10 gallon tank 20.3"L x 10.5"W x 12.6"H
Actual size: Width minimum 9 7/8inches to maximum 10 1/4 inches
Height minimum 11 1/2 inches to maximum 12 inches
Compatible with Aqueon 20 gallon long tanks. these dividers do not fit any other brand of tank.
Actual size: Width minimum 11 5/8 inches to maximum 12 inches
Height minimum 11 1/2 inches to maximum 12 inches
These dividers do NOT fit any other brand of tank other than those listed above.
The dividers are easy to install and maintain. They will come with an instruction sheet and a video link on how to install them. They are made from a solid material and are very sturdy. The divider has been designed with holes throughout. It works best in a tank with substrate and is not suitable for bare bottom tanks. The divider will not work in a rimless tank unless siliconed in place. If you don't have a tight fitting lid you may need to lower the water level.
Which Divider is Best For You?
With holes: A divider with holes helps with water flow. We do recommend sponge filters in each section. The bettas can also periodically see each other which will promote enrichment and occasional flaring.
Without Holes: A divider with no holes provides a very peaceful environment. The bettas will still occasionally see each other but not as often as with the divider with holes. This divider does require filtration in each section. We recommend sponge filters as the flow can be adjusted to the bettas requirements.
A no holes divider is also perfect for dividing shrimp and guppy/endler tanks. Aquarium sealant is required to make a fully enclosed section so shrimp or guppies cannot get to the other side. This is ideal if you're wanting to keep specific colors or strains from cross breeding.
Things to note before buying.
These dividers are not flimsy like mesh dividers and you may find you require filtration in each section to help with water flow.
Do not force the divider into a tank as we will not be held responsible for any damage to the aquarium.
To see how to install the divider click here Videos
Made in the USA.